Antminer D3

$39.00

Category:

Description

Notes

1. Specifications and other information of the Antminer D3 are as mentioned below.

2. Please select the correct address for shipping before you submit your order because, for this batch, the shipping address cannot be changed after the order has been submitted.

3.The shipping for this batch will be arranged within 10 working days after we have received full payment. We advise you to research and prepare in advance for customs’ clearance in your country to avoid delays or unexpected costs.

For this batch, D3,L3+ and L3++ will have 10% discount on shipping costs.

4. For Germany shipments, please be aware about we have numbers of German customers met custom clearance problems when shipments arrange via DHL. You may wish to consider this piece of information before choosing shipping carrier. In the case of any custom delay or shipment return due to DHL shipping,we will not be held liable.

5. You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. We recommend the APW7 to power the D3.

6. The power cord is not included, please find one with at least 10A from your local market.

Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.

7. To ensure the authenticity, high quality and full warranty coverage of products you purchase from us, we strongly suggest you to purchase through our official website only and we will only be responsible for products purchased through our official website. Please acknowledge that we do not have any authorized third party distributor and reseller in any region or country. We will not allow our products to be sold by individuals through phone call, email or any other method. It could be a scam if you place your order with anyone claiming to be our official sales representative/distributor via email or Skype or on any other website other than our official website. We do not have any obligation to provide you with any compensation or indemnification in case of scam caused by third parties. The terms and conditions of sales of our products on our official websites are the only binding version and we will not in any event match any preferential terms offered by any other unauthorized third party distributor and reseller.

8. Please click here to refer to the all certificates of the products.Please research on your local custom requirements before purchasing from us. In the case of any custom delay or shipment return due to the lack of certification, we will not be held liable.

9. If delivery to US, according to the NY ruling N297495 ,mining machine might be classified under 8543.70.9960 which contain with 2.6% of the import duty and tax plus additional 25% of the import duty due to country of origin made in China.

10. Due to the shortage of some materials used for EU standard miner, we are sorry to inform you the shipment of miners to EU countries will be suspended from 15/11/2018, new shipping date will be announced soon. We apologize for the inconvenience and thank you for your understanding.

Parameters of ANTMINER D3

No.

Parameters

Value

1

Product model

D3

2

Total quantity of hash chips

180 chips

3

Total quantity of hash boards

3 boards per miner

4

Total hash rate

17GH/s±5%

5

DC voltage input

11.60~13.00 V

6

DC current input @12V DC

 75.2A +5%

7

DC Power @12V DC input

 902W +7%

8 220VAC Power @25℃ ,93%

conversion efficiency of APW3

970 W +7%

9 220VAC Power efficiency @25℃,93% conversion efficiency of APW3 57mJ/MH+7%
10

Weight(without package)

 4.2 kg

11

Operation temperature

0-40 ℃

12

Storage temperature

-40-85 ℃

13

Operation humidity

5%RH-95%RH,

prevent condensation

14

Noise

76 dB

15

Networking connection mode

Ethernet Cable

16

Power connection mode

All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent  the control board to be powered up before hash boards be powered up.

17

Size(Length*Width*Height,without package)

320mm*130mm*190mm

Payment

1. BTC(Bitcoin),LTC(Litecoin) and USD wire are accepted in this batch.
For USD wire, orders must be USD600 and above, otherwise, please make payment with cryptocurrency. Do upload the bank proof of transfer within 3 days. If no proof of transfer is loaded within this time period, the order will expire.

PayPal is only available for order amount less than $200. $500 is the maximum accumulated amount you can pay within 180 days using PayPal.

2. The shipping cost, custom charges and taxes (if any) are not included in the retail price shown above.

3. Please fill your desired quantity, shipping address and select your preferred shipping service while placing an order to learn the shipping cost to your shipping address.

4. Special Provision: After an order has been submitted, a request to cancel the order, refund any part of the ordered amount or change the ordered item(s) to different items(s) or different batch(es) WILL NOT BE ENTERTAINED by us. We advise you to make any purchase only after consideration.

5. To get a fast response from our team for any order or sales related inquiries please submit a request here through our email.

6. The unit price and total price of the products, the amount paid by you shall be all denominated in U.S. dollars, no matter what currency you uses to make payment . The exchange rate between U.S. dollars and cryptocurrency shall be adopted following the below rules:

• In the event that you pay for your placed Order which is valid and has not been fully paid yet, the exchange rate between U.S. dollars and cryptocurrency fixed in such placed Order shall be adopted;

• Otherwise, the real time exchange rate between U.S. dollars and cryptocurrency displayed on the Site upon payment shall be adopted.

NOTE: The price of cryptocurrency mining machines has to be adjusted frequently in accordance with variables like the exchange rate of the cryptocurrency with fiat, the cryptocurrency’s network difficulty, or the expected difficulty increase. Refund requests based on price changes WILL NOT be honored.

Warranty

1. A 180-day warranty is provided starting from the shipping date. To avail this warranty a repair ticket must be generated by the customer on our website. Overclocking the miner will void the warranty immediately.

2. The warranty only applies to the original purchaser who purchased the machine directly from us. Once the miner is resold warranty coverage becomes the responsibility of the re-seller.

3. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the our warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.

4. The following events will void the warranty:

a. Customer removes/replaces any components by himself without receiving permission from us first;

b. Damage caused by poor power supply, lightning or voltage surges;

c. Burnt parts on hash boards or chips;

d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.

5. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with our instructions.

6. We will cover shipping cost when shipping a replacement unit within the warranty period.

7. If you notice there are some loose heatsinks when you receive the miner, please inform us by email within 3 days from the date the package is received according to UPS/DHL/FedEx’s website.

8. We do not take any responsibility for or compensate for any loss as a result of downtime caused by delays in transportation as a result of customs formalities or other reasons.

Reviews

There are no reviews yet.

Be the first to review “Antminer D3”

Your email address will not be published. Required fields are marked *